DPA temperatures check
Summary
| Date start | 2014:097:17:14:10.083 |
| Date stop | 2014:103:23:00:48.205 |
| 1DPAMZT status | OK (Planning Limit = 33.0 C) |
| Run time | Fri Apr 4 11:15:26 2014 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -2.32 | -1.98 | -1.14 | -0.46 | 0.36 | 0.84 | 1.88 |
| PITCH | -1.204 | 0.051 | 0.084 | 0.147 | 0.244 | 0.451 | 2.486 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -2.32 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
