DPA temperatures check
Summary
| Date start | 2017:237:03:30:01.285 |
| Date stop | 2017:240:02:29:06.294 |
| 1DPAMZT status | NOT OK (Planning Limit = 35.5 C) |
| Run time | Wed Aug 23 08:37:58 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
1DPAMZT Violations
| Date start | Date stop | Max temperature |
|---|---|---|
| 2017:231:16:58:46.816 | 2017:231:17:04:14.816 | 35.53 |
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -3.60 | -2.19 | -1.50 | -0.64 | 0.23 | 1.07 | 1.94 |
| PITCH | -2.095 | -0.192 | 0.066 | 0.177 | 0.353 | 0.614 | 3.886 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -3.6 | 2.00 |
| PITCH | 99 | 3.886 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
