DPA temperatures check
Summary
| Date start | 2018:336:22:45:40.057 |
| Date stop | 2018:350:19:38:19.442 |
| Model status | NOT OK (Planning Limit = 36.5 C) |
| Load directory | /data/acis/LoadReviews/2018/DEC0318/ofls |
| Run time | Fri Nov 30 16:35:11 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
1DPAMZT Hot Violations
| Date start | Date stop | Max temperature |
|---|---|---|
| 2018:337:12:23:50.816 | 2018:337:12:34:46.816 | 36.60 |
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -1.31 | -0.93 | -0.59 | 0.46 | 1.09 | 1.64 | 1.91 |
| PITCH | -4.655 | -0.269 | -0.216 | -0.032 | 0.140 | 0.263 | 5.346 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.223 | -0.573 | -0.412 | 0.187 | 0.490 | 0.766 | 1.470 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| PITCH | 1 | -4.655 | 3.00 |
| PITCH | 99 | 5.346 | 3.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT >= 20.0 degC.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
