DPA temperatures check
Summary
| Date start | 2015:191:15:46:20.731 |
| Date stop | 2015:194:02:29:56.800 |
| 1DPAMZT status | OK (Planning Limit = 35.5 C) |
| Run time | Tue Jul 7 14:24:31 2015 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -3.35 | -2.60 | -1.69 | -0.61 | 0.58 | 1.56 | 2.73 |
| PITCH | -1.601 | -0.092 | 0.132 | 0.207 | 0.267 | 0.493 | 2.703 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -3.35 | 2.00 |
| 1DPAMZT | 99 | 2.73 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
