DPA temperatures check
Summary
| Date start | 2016:090:07:30:12.807 |
| Date stop | 2016:095:12:16:59.174 |
| 1DPAMZT status | OK (Planning Limit = 35.5 C) |
| Run time | Mon Mar 28 09:42:10 2016 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No 1DPAMZT Violations
DPA Model Validation
MSID quantiles
Note: DPA quantiles are calculated using only points where 1DPAMZT > 20 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| 1DPAMZT | -2.57 | -1.53 | -0.62 | 0.28 | 1.03 | 1.66 | 2.46 |
| PITCH | -1.429 | 0.041 | 0.103 | 0.220 | 0.369 | 0.440 | 2.745 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| 1DPAMZT | 1 | -2.57 | 2.00 |
| 1DPAMZT | 99 | 2.46 | 2.00 |
1DPAMZT
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
PITCH
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
TSCPOS
Note: DPA residual histograms include only points where 1DPAMZT > 20 degC.
Red = telemetry, blue = model
