Fitting a PHA Data Set with Multiple Responses
Sherpa Threads (CIAO 4.11 Sherpa v1)
Overview
Synopsis:
This thread demonstrates the use of the Sherpa functions set_full_model, set_bkg_full_model, and get_response to explicitly define complex source and background model expressions in which some of the model components are convolved with the instrument response, while others are not. It is not possible to define such a model expression in the usual way with set_source and set_bkg_source, as these functions do not allow for applying separate responses to individual model components within a single model expression.
We consider the scenario in which one would choose to model the X-ray background together with the source emission, instead of subtracting it. For example, this would be useful for modeling extended, diffuse source emission which covers the entire field of view of an observation, thereby leaving no source-free region from which to extract a background spectrum. As a result, the various components contributing to the background level would be modeled together with the source emission (assuming that using an average background level from a blank-sky data set is inappropriate).
If you would like to fit a background-subtracted source spectrum using a common RMF and ARF for the source and background, or fit source and background spectra simultaneously with proper and distinct RMFs and ARFs (but with one response per model expression, unlike in this thread), refer to the Sherpa thread Simultaneously Fitting Source and Background Spectra.
The sample data files used in this thread are available in sherpa.tar.gz; they can be generated by following the CIAO thread Using specextract to Extract ACIS Spectra and Response Files for Extended Sources .
Last Update: 10 Dec 2018 - updated for CIAO 4.11: screen output and fits updated
Contents
- Getting Started
- Reading the PHA Data into Sherpa
- Defining the Instrument Responses
- Defining the Model Expressions
- Modifying Method & Statistic Settings
- Fitting
- Plotting individual fitted model components
- Examining Fit Results
- Saving the Sherpa Session
- Scripting It
- Summary
- History
- Images
Getting Started
Please follow the "Obtaining data used in Sherpa threads" thread.
Reading the PHA Data into Sherpa
In this thread, we wish to fit the the PHA spectrum contained in the FITS file source.pi. This data set is read into Sherpa with the load_pha command, and assigned to default data set ID "1":
sherpa> load_pha("source.pi")
read ARF file source.warf
read RMF file source.wrmf
read ARF (background) file bkg.warf
read RMF (background) file bkg.wrmf
read background file bkg.pi
The associated background PHA file and ARF and RMF instrument response files are automatically read into the session along with the source data by the load_pha function. If the names of these files had not been recorded in the header of source.pi, they could have been loaded with load_bkg, load_arf, and load_rmf.
Information on all loaded data sets may be viewed with the show_all command, or individually with show_data, show_bkg, print(get_arf())/print(get_rmf()), and print(get_bkg_arf())/print(get_bkg_rmf()). The source, background, and source ARF data may be visualized with plot_data, plot_bkg and plot_arf (or simply the plot command, as shown below).
sherpa> set_xlog() sherpa> set_ylog() sherpa> ignore(":1.0, 7.0:") sherpa> group_counts(1,30,bkg_id=1) sherpa> group_counts(1,30) sherpa> plot("data", 1, "bkg",1)
Before plotting, we set our preferences for the x- and y-axis scale of all data, model, and fit plots created in this session to logarithmic by using the set_xlog and set_ylog commands with no arguments (to learn how to change the default axis scale from linear to logarithmic so that these commands do not have to be run in each Sherpa session, see this Sherpa FAQ.) Then, we filter the data with the ignore command in order to include only the 1.0-7.0 keV range in our analysis, and group both spectra so that each bin contains a minumum of 30 counts to ensure that the spectral features are clearly visible in the plot displayed in Figure 1. Finally, the source and background data sets are plotted in separate frames within one window using the plot command.
Figure 1: Plot of PHA source and background spectra
After plotting the spectra we ungroup the data sets, since we wish to fit the data ungrouped.
sherpa> ungroup()
Defining the Instrument Responses
Source Instrument Response
The ARF and RMF response files for source.pi were automatically loaded with load_pha; therefore, we do not have to load them separately with load_arf and load_rmf. We assign the instrument response associated with the source data to the variable 'rsp' using the get_response function, which returns the instrument response model (ARF*RMF) associated with a data set.
sherpa> rsp = get_response()
The source data set ID is "1", which is the default, therefore it is not necessary to explicitly enter a data set ID as an argument to get_response. The current definition of the instrument responses may be examined using show_all or the get_arf/get_bkg_arf and get_rmf/get_bkg_rmf commands:
sherpa> print(get_arf()) name = source.warf energ_lo = Float64[1070] energ_hi = Float64[1070] specresp = Float64[1070] bin_lo = None bin_hi = None exposure = 110163.239678 ethresh = 1e-10 sherpa> print(get_rmf()) name = source.wrmf detchans = 1024 energ_lo = Float64[1070] energ_hi = Float64[1070] n_grp = UInt64[1070] f_chan = UInt32[1346] n_chan = UInt32[1346] matrix = Float64[382838] offset = 1 e_min = Float64[1024] e_max = Float64[1024] ethresh = 1e-10 sherpa> print(get_bkg_arf()) name = bkg.warf energ_lo = Float64[1070] energ_hi = Float64[1070] specresp = Float64[1070] bin_lo = None bin_hi = None exposure = 110163.239678 ethresh = 1e-10 sherpa> print(get_bkg_rmf()) name = bkg.wrmf detchans = 1024 energ_lo = Float64[1070] energ_hi = Float64[1070] n_grp = UInt64[1070] f_chan = UInt32[1364] n_chan = UInt32[1364] matrix = Float64[382698] offset = 1 e_min = Float64[1024] e_max = Float64[1024] ethresh = 1e-10
The output shows that source.warf, source.wrmf, bkg.warf, and bkg.wrmf currently define the source and background instrument responses.
Background Instrument Responses
In this example, we choose to model the background emission together with the source emission, which in this case involves defining a complex background model consisting of multiple components. We assume that the same ARF and RMF associated with the source data set apply to the background spectrum (i.e., there is not an independent response for the background since the background spectrum was extracted from a source-free region of the source observation).
The background level of an X-ray observation consists of contributions from both astrophysical and instrumental sources; therefore, some components of the background model need to be convolved with the source instrument response, whereas others do not. This requires that the instrumental components of the background model be unconvolved, i.e. convolved with a unit effective area, defined as follows:
sherpa> copy_data(1,2) sherpa> unit_arf = get_bkg_arf(2) sherpa> unit_arf.specresp = 0.*unit_arf.specresp + 1.0 sherpa> bunitrsp = get_response(2,bkg_id=1)
Here, we simply copy source data set 1 and its associated background and responses (id=1, bkg_id=1) to data set 2 (id=2, bkg_id=1) to avoid overwriting the background ARF data contained in data set 1, which we will need for the background model components which should be folded through the instrument effective area. Then, we assign the background ARF model in data set 2 (which is exactly the same as the background ARF in data set 1) returned by get_arf to the variable 'unit_arf' and set the spectral response of 'unit_arf' to contain all 1s. This is the unit ARF response model which is appropriate for convolving the instrumental background components of the model expression. The ARF*RMF instrument response model stored in variable 'bunitrsp' contains the unit background ARF and the untouched background RMF.
The background ARF*RMF instrument response model returned by 'get_response(bkg_id=1)' should be used to convolve the cosmic background model component, as shown in the next section. We define another response variable for the background, 'brsp', which includes the untouched ARF and untouched RMF for convolving the astrophysical background component:
sherpa> brsp = get_response(bkg_id=1)
Defining the Model Expressions
Background Model
The set_full_model and set_bkg_full_model functions are used to explicitly define complex source and background model expressions for simultaneous fitting. Since the background model in this example is complex, in that it contains many model components, each convolved by a separate response, we consider the background model components first.
We assume that the background contributions to the emission spectrum consist of an absorbed thermal plasma model to represent the astrophysical diffuse Cosmic X-ray Background (CXB), and several Gaussian models plus an exponential cutoff power-law model to fit the instrumental quiescent background.
This example does not fully account for all possible background contributions to a Chandra ACIS data set—e.g., we are ignoring the contribution from resolved point sources to the CXB—it is meant only for demonstration purposes.
We define the explicit background model expression using the set_bkg_full_model function, which is used to model the background associated with a source modeled by the set_full_model function. Note that it is not possible to define such a complex background model expression in the usual way with set_bkg_source, as this function does not allow for applying separate responses to individual model components within a single model expression.
sherpa> set_bkg_full_model(bunitrsp(gauss1d.bg1 + gauss1d.bg2 + xscutoffpl.bpl) + brsp(xsphabs.gal*xsapec.bth))
Multiplication by the background exposure time is implicit, and the necessary scaling resulting from differences between the source and background exposure times and spectral extraction areas is applied to the background model within the set_full_model expression, as shown in the next section (note in this example, the exposure ratio is 1 since the source and background spectra were extracted from the same observation).
Source Model
To describe the source contributions to the total emission in the spectrum, we define a source model consisting of an absorbed power-law multiplied by an absorbed thermal plasma model, to describe the bright central point source and the surrounding diffuse thermal gas, respectively. We specify that the source model be convolved by the instrument response contained in the variable 'rsp', defined above. Multiplication by the source exposure time is done implicitly. We define the full model expression to include the source and background components, including the scaling of the background to account for the different spectral extraction areas of the source and background.
sherpa> my_bkg_model = (bunitrsp(bg1+bg2+bpl) + brsp(gal*bth)) sherpa> scale = get_bkg_scale() sherpa> set_full_model(rsp((xsphabs.gal+xsphabs.intrin)*xspowerlaw.spl+gal*xsapec.sth) + scale*my_bkg_model)
Note that the source component in the set_full_model expression above would normally be defined by doing 'set_source((xsphabs.gal+xsphabs.intrin)*xspowerlaw.spl + gal*xsapec.sth)', which automatically and implicitly convolves the source model expression with the appropriate response. We do not define the source model in this usual way in this example, since the associated background spectrum requires a complex model expression consisting of multiple components convolved by different responses. Otherwise, set_bkg_source would be used to set the background source model in the usual way, for simultaneous source and background fitting.
It is important to keep in mind that the Sherpa functions which are related to a source or background model defined with set_source or set_bkg_source, such as plot_source/plot_bkg_source or calc_energy_flux, are not compatible with the complete model expression defined by the set_full_model or set_bkg_full_model functions. In order to use these Sherpa functions, source and background models should be defined in the usual way with the automatic functions set_source and set_bkg_source.
Modifying Method & Statistic Settings
The show_method and show_stat functions may be used to view the current method and statistics settings:
sherpa> show_method() Optimization Method: LevMar name = levmar ftol = 1.19209289551e-07 xtol = 1.19209289551e-07 gtol = 1.19209289551e-07 maxfev = None epsfcn = 1.19209289551e-07 factor = 100.0 verbose = 0 sherpa> show_stat() Statistic: Chi2Gehrels Chi Squared with Gehrels variance. The variance is estimated from the number of counts in each bin, but unlike `Chi2DataVar`, the Gaussian approximation is not used. This makes it more-suitable for use with low-count data. The standard deviation for each bin is calculated using the approximation from [1]_: sigma(i,S) = 1 + sqrt(N(i,s) + 0.75) where the higher-order terms have been dropped. This is accurate to approximately one percent. For data where the background has not been subtracted then the error term is: sigma(i) = sigma(i,S) whereas with background subtraction, sigma(i)^2 = sigma(i,S)^2 + [A(S)/A(B)]^2 sigma(i,B)^2 Notes ----- The accuracy of the error term when the background has been subtracted has not been determined. A preferable approach to background subtraction is to model the background as well as the source signal. References ---------- .. [1] "Confidence limits for small numbers of events in astrophysical data", Gehrels, N. 1986, ApJ, vol 303, p. 336-346. http://adsabs.harvard.edu/abs/1986ApJ...303..336G
We decide to use the Cstat fit statistic and Nelder-Mead optimization method for fitting this data, which we specify using the set_stat and set_method commands.
sherpa> set_method("neldermead") sherpa> set_stat("cstat")
Details about the optimization methods and fit statistics available in Sherpa may be accessed by typing 'ahelp [method name]' at the Sherpa prompt, or by visiting the Sherpa Statistics and Optimization Methods pages.
sherpa> ahelp "levmar" sherpa> ahelp "chi2datavar"
Note that it is usually advisable to switch the optimization method and/or fit statistic at least once during a fitting trial to get a feel for the model parameter space and try to determine the "true" best-fit model parameters. Observe an example of this in the Fitting section below, where we first fit using the chosen Nelder-Mead optimization method, and then switch to the Levenberg-Marquardt method to see how this affects the fit results. The Sherpa Optimization Methods page contains a detailed comparison of the available methods in Sherpa.
Fitting
The current definition of the Sherpa source model expression, including initial parameter values for each model component, may be examined using show_model:
sherpa> show_model() Model: 1 (apply_rmf(apply_arf((110163.239678 * (((xsphabs.gal + xsphabs.intrin) * xspowerlaw.spl) + (xsphabs.gal * xsapec.sth))))) + ((1.83660825173 * const2d.c0) * (apply_rmf(apply_arf((110163.239678 * ((gauss1d.bg1 + gauss1d.bg2) + xscutoffpl.bpl)))) + apply_rmf(apply_arf((110163.239678 * (xsphabs.gal * xsapec.bth))))))) Param Type Value Min Max Units ----- ---- ----- --- --- ----- gal.nH thawed 1 0 100000 10^22 atoms / cm^2 intrin.nH thawed 1 0 100000 10^22 atoms / cm^2 spl.PhoIndex thawed 1 -2 9 spl.norm thawed 1 0 1e+24 sth.kT thawed 1 0.008 64 keV sth.Abundanc frozen 1 0 5 sth.redshift frozen 0 0 10 sth.norm thawed 1 0 1e+24 c0.c0 thawed 1 0 3.40282e+38 bg1.fwhm thawed 10 1.17549e-38 3.40282e+38 bg1.pos thawed 0 -3.40282e+38 3.40282e+38 bg1.ampl thawed 1 -3.40282e+38 3.40282e+38 bg2.fwhm thawed 10 1.17549e-38 3.40282e+38 bg2.pos thawed 0 -3.40282e+38 3.40282e+38 bg2.ampl thawed 1 -3.40282e+38 3.40282e+38 bpl.PhoIndex thawed 1 -2 9 bpl.HighECut thawed 15 1 500 keV bpl.norm thawed 1 0 1e+24 bth.kT thawed 1 0.008 64 keV bth.Abundanc frozen 1 0 5 bth.redshift frozen 0 0 10 bth.norm thawed 1 0 1e+24
Since we are fitting a complex model expression to the data containing multiple components and responses, we approach the final fit to the data in a series of smaller trials in which we fit each model component separately, before fitting the entire model.
Background
The Sherpa guess function may be used to estimate initial parameter values for a model, as well as the minima and maxima for their ranges. To have Sherpa automatically query for the initial parameter values when a model is established, set 'paramprompt(True)' (it is 'False' by default).
We guess the initial parameter values for some background model components and set other values ourselves. For the thermal plasma model, we assume the solar abundances contained in Grevesse, N. & Sauval, A.J. (1998, Space Science Reviews 85, 161).
sherpa> set_xsabund("grsa") sherpa> guess(bpl) sherpa> guess(bg1) sherpa> guess(bg2) sherpa> guess(bth) sherpa> set_par(gal.nH, 0.041, frozen=True) sherpa> bpl.phoindex= 0.15 sherpa> bpl.HighECut = 5.6 sherpa> bg1.pos = 1.7 sherpq> bg2.pos= 2.1 sherpa> bth.kT = 0.15
First, we fit only the instrumental power-law component using the fit_bkg function, which fits only the background data set(s) current in the session; this requires temporarily re-defining the background model expression to include only the model component we are interested in fitting:
sherpa> set_bkg_full_model(bunitrsp(bpl)) sherpa> fit_bkg(1) Solar Abundance Vector set to grsa: Grevesse, N. & Sauval, A. J. Space Science Reviews 85, 161 (1998) Dataset = 1 Method = neldermead Statistic = cstat Initial fit statistic = 824.024 Final fit statistic = 583.812 at function evaluation 602 Data points = 412 Degrees of freedom = 409 Probability [Q-value] = 2.78352e-08 Reduced statistic = 1.42741 Change in statistic = 240.212 bpl.PhoIndex 0.464165 bpl.HighECut 499.99 bpl.norm 0.00648051
Next, we successively add the two instrumental Gaussian model components to the background model expression, and finally the cosmic thermal plasma component, re-fitting at each step:
sherpa> set_bkg_full_model(bunitrsp(bpl+bg1)) sherpa> fit_bkg(1) Dataset = 1 Method = neldermead Statistic = cstat Initial fit statistic = 1296.69 Final fit statistic = 534.915 at function evaluation 1239 Data points = 412 Degrees of freedom = 406 Probability [Q-value] = 1.72958e-05 Reduced statistic = 1.31753 Change in statistic = 761.779 bpl.PhoIndex 0.301075 bpl.HighECut 499.945 bpl.norm 0.00486564 bg1.fwhm 0.691355 bg1.pos 1.96966 bg1.ampl 0.00276572 sherpa> set_bkg_full_model(bunitrsp(bpl+bg1+bg2)) sherpa> fit_bkg(1) Dataset = 1 Method = neldermead Statistic = cstat Initial fit statistic = 1448.76 Final fit statistic = 513.03 at function evaluation 2995 Data points = 412 Degrees of freedom = 403 Probability [Q-value] = 0.000163284 Reduced statistic = 1.27303 Change in statistic = 935.731 bpl.PhoIndex 0.431101 bpl.HighECut 437.021 bpl.norm 0.00553517 bg1.fwhm 0.630048 bg1.pos 6.76128 bg1.ampl 0.00141005 bg2.fwhm 0.594845 bg2.pos 2.01143 bg2.ampl 0.00275632 sherpa> set_bkg_full_model(bunitrsp(bpl+bg1+bg2) + brsp(gal*bth)) sherpa> fit_bkg(1) Dataset = 1 Method = neldermead Statistic = cstat Initial fit statistic = 2233.49 Final fit statistic = 512.975 at function evaluation 2974 Data points = 412 Degrees of freedom = 401 Probability [Q-value] = 0.000126449 Reduced statistic = 1.27924 Change in statistic = 1720.52 bpl.PhoIndex 0.4082 bpl.HighECut 449.901 bpl.norm 0.00535145 bg1.fwhm 0.616156 bg1.pos 6.75844 bg1.ampl 0.00138692 bg2.fwhm 0.61499 bg2.pos 2.00608 bg2.ampl 0.0027963 bth.kT 0.213237 bth.norm 6.45411e-06 sherpa> bpl.PhoIndex = 0.1 sherpa> bpl.HighECut = 5.6 sherpa> set_method("levmar") sherpa> fit_bkg(1) Dataset = 1 Method = levmar Statistic = cstat Initial fit statistic = 684.27 Final fit statistic = 513.556 at function evaluation 567 Data points = 412 Degrees of freedom = 401 Probability [Q-value] = 0.000118121 Reduced statistic = 1.28069 Change in statistic = 170.714 bpl.PhoIndex 0.211561 +/- 0.228087 bpl.HighECut 20.4921 +/- 0 bpl.norm 0.00484083 +/- 0.00186916 bg1.fwhm 0.663477 +/- 0.303153 bg1.pos 6.76695 +/- 0.115066 bg1.ampl 0.00145221 +/- 0.000388166 bg2.fwhm 0.584863 +/- 0.134471 bg2.pos 2.02186 +/- 0.0590451 bg2.ampl 0.00281026 +/- 0.000525964 bth.kT 8.14191 +/- 17.9434 bth.norm 6.37784e-06 +/- 1.66133e-05 WARNING: parameter value bth.norm is at its minimum boundary 6.37783863042e-06
We can check that the fit was successful by examining the fit residuals:
sherpa> plot_bkg_fit_resid() sherpa> set_current_plot("plot2") sherpa> linear_scale(Y_AXIS)
Figure 2 shows the resulting plot.
Figure 2: Background fit with residuals
Source plus background
Now that we have reasonable background model parameter values resulting from the background fitting trials, we can fit the entire source-plus-background model expression, first with the background model parameters frozen to constrain the source model, and finally with them thawed.
We fit the source and background model components together in one fitting trial after setting initial model parameter values for the source:
sherpa> show_bkg_model(1) Background Model: 1:1 (apply_rmf(apply_arf((110163.23967791 * ((xscutoffpl.bpl + gauss1d.bg1) + gauss1d.bg2)))) + apply_rmf(apply_arf((110163.23967791 * (xsphabs.gal * xsapec.bth))))) Param Type Value Min Max Units ----- ---- ----- --- --- ----- bpl.PhoIndex thawed 0.211561 -2 9 bpl.HighECut thawed 20.4921 1 500 keV bpl.norm thawed 0.00484083 6.37784e-06 6.37784 bg1.fwhm thawed 0.663477 0.0022776 2277.6 bg1.pos thawed 6.76695 1.0074 7.0226 bg1.ampl thawed 0.00145221 6.37784e-06 6.37784 bg2.fwhm thawed 0.584863 0.0022776 2277.6 bg2.pos thawed 2.02186 1.0074 7.0226 bg2.ampl thawed 0.00281026 6.37784e-06 6.37784 gal.nH frozen 0.041 0 100000 10^22 atoms / cm^2 bth.kT thawed 8.14191 0.008 64 keV bth.Abundanc frozen 1 0 5 bth.redshift frozen 0 -0.999 10 bth.norm thawed 6.37784e-06 6.37784e-06 6.37784 sherpa> show_model(1) Model: 1 (apply_rmf(apply_arf((110163.23967791 * (((xsphabs.gal + xsphabs.intrin) * xspowerlaw.spl) + (xsphabs.gal * xsapec.sth))))) + (1.8366082517267892 * (apply_rmf(apply_arf((110163.23967791 * ((gauss1d.bg1 + gauss1d.bg2) + xscutoffpl.bpl)))) + apply_rmf(apply_arf((110163.23967791 * (xsphabs.gal * xsapec.bth))))))) Param Type Value Min Max Units ----- ---- ----- --- --- ----- gal.nH frozen 0.041 0 100000 10^22 atoms / cm^2 intrin.nH thawed 1 0 100000 10^22 atoms / cm^2 spl.PhoIndex thawed 1 -2 9 spl.norm thawed 1 0 1e+24 sth.kT thawed 1 0.008 64 keV sth.Abundanc frozen 1 0 5 sth.redshift frozen 0 -0.999 10 sth.norm thawed 1 0 1e+24 bg1.fwhm thawed 0.663477 0.0022776 2277.6 bg1.pos thawed 6.76695 1.0074 7.0226 bg1.ampl thawed 0.00145221 6.37784e-06 6.37784 bg2.fwhm thawed 0.584863 0.0022776 2277.6 bg2.pos thawed 2.02186 1.0074 7.0226 bg2.ampl thawed 0.00281026 6.37784e-06 6.37784 bpl.PhoIndex thawed 0.211561 -2 9 bpl.HighECut thawed 20.4921 1 500 keV bpl.norm thawed 0.00484083 6.37784e-06 6.37784 bth.kT thawed 8.14191 0.008 64 keV bth.Abundanc frozen 1 0 5 bth.redshift frozen 0 -0.999 10 bth.norm thawed 6.37784e-06 6.37784e-06 6.37784 sherpa> freeze(bpl, bg1, bg2, bth.norm, bth.kT) sherpa> guess(spl) sherpa> guess(sth) sherpa> intrin.nH = 0.038 sherpa> spl.phoindex= 2.0 sherpa> set_par(sth.redshift, 2.0, frozen=True) sherpa> sth.kT=1.5
The source and background data assigned to data set 1 may be simultaneously fit using the fit function, as follows:
sherpa> fit(1) Dataset = 1 Method = levmar Statistic = cstat Initial fit statistic = 1.14275e+06 Final fit statistic = 950.149 at function evaluation 518 Data points = 824 Degrees of freedom = 819 Probability [Q-value] = 0.000973111 Reduced statistic = 1.16013 Change in statistic = 1.1418e+06 intrin.nH 0.552593 +/- 0.433972 spl.PhoIndex 1.67456 +/- 0.199861 spl.norm 4.30392e-05 +/- 1.58886e-05 sth.kT 3.43294 +/- 0 sth.norm 2.51183e-05 +/- 0.000330567 sherpa> thaw(bpl, bg1, bg2, bth.norm, bth.kT) sherpa> fit(1) Dataset = 1 Method = levmar Statistic = cstat Initial fit statistic = 950.149 Final fit statistic = 939.296 at function evaluation 738 Data points = 824 Degrees of freedom = 808 Probability [Q-value] = 0.000902279 Reduced statistic = 1.16249 Change in statistic = 10.8535 intrin.nH 0.635603 +/- 0.790562 spl.PhoIndex 1.69385 +/- 0.262217 spl.norm 4.28204e-05 +/- 1.46847e-05 sth.kT 3.45667 +/- 0 sth.norm 9.32613e-05 +/- 0.000316452 bg1.fwhm 0.614114 +/- 0.1553 bg1.pos 6.72093 +/- 0.0538854 bg1.ampl 0.00149075 +/- 0.000247313 bg2.fwhm 0.695963 +/- 0.114666 bg2.pos 1.91841 +/- 0.0594148 bg2.ampl 0.00282296 +/- 0.00037263 bpl.PhoIndex 0.203937 +/- 0.181703 bpl.HighECut 25.143 +/- 0 bpl.norm 0.00466694 +/- 0.00148935 bth.kT 29.4494 +/- 0 bth.norm 6.37784e-06 +/- 1.68404e-05 WARNING: parameter value bth.norm is at its minimum boundary 6.37783863042e-06 sherpa> set_method("neldermead") sherpa> fit(1) Dataset = 1 Method = neldermead Statistic = cstat Initial fit statistic = 939.296 Final fit statistic = 937.949 at function evaluation 6832 Data points = 824 Degrees of freedom = 808 Probability [Q-value] = 0.000999685 Reduced statistic = 1.16083 Change in statistic = 1.3461 intrin.nH 0.664631 spl.PhoIndex 1.69387 spl.norm 4.29889e-05 sth.kT 4.14681 sth.norm 9.36375e-05 bg1.fwhm 0.584793 bg1.pos 6.71899 bg1.ampl 0.00140018 bg2.fwhm 0.709707 bg2.pos 1.91964 bg2.ampl 0.00280728 bpl.PhoIndex 0.307879 bpl.HighECut 180.198 bpl.norm 0.00466016 bth.kT 63.8488 bth.norm 6.61171e-06
The plot_fit_resid and plot_fit_delchi functions may be used to visualize the quality of the fit, and the ChIPS function print_window to save the plot as a PostScript file:
sherpa> plot_fit_resid() sherpa> print_window("sherpa_fit.ps")
Figure 3 shows the resulting plot.
Figure 3: Source-plus-background fit with residuals
Plotting individual fitted model components
To visualize the contributions to the fit of the emission from the individual source and background components, we can use the Sherpa plot_model_component command together with the ChIPS set_histogram command for adjusting the color of the line describing each of the model components. The 'overplot' option of the plot_model command, together with the ChIPS set_histogram command for adjusting the color of the line describing each of the model components. Note that the source model must be re-defined at each step to include only the single model component which should be overplotted, using the set_full_model command.
sherpa> plot_fit() sherpa> set_full_model(rsp(gal*spl)) sherpa> plot_model(overplot=True) sherpa> set_histogram("line.color=yellow") sherpa> set_full_model(bunitrsp(bg1+bg2)) sherpa> plot_model(overplot=True) sherpa> set_histogram("line.color=cyan") sherpa> set_full_model(bunitrsp(bpl)) sherpa> plot_model(overplot=True) sherpa> set_histogram("line.color=blue") sherpa> set_full_model(brsp(gal*bth)) sherpa> plot_model(overplot=True) sherpa> set_histogram("line.color=darkred") sherpa> limits(Y_AXIS,1e-4,AUTO) sherpa> set_plot_title("Source and background model components")
The resulting plot is shown in Figure 4
Figure 4: Individual components of best-fit model to source and background spectra
As demonstrated above, the plot_model_component command may be used to plot one, or a combination of, individual source model components to allow the user to quickly visualize the contribution to the full model being used to fit the data. The model components plotted with this command are convolved with any assigned convolution models, e.g. PSF or PHA responses. The plot_source_component command is available for visualizing the unconvolved model components, and get_model_component_plot/get_source_component_plot for accessing the data arrays and preferences which define the corresponding plot.
Examining Fit Results
Several algorithms are available in Sherpa for examining fit results, such as confidence, covariance, interval-projection, and region-projection. Here, we use the preferred confidence method to estimate the 1σ confidence intervals for the thawed model parameters.
sherpa> set_conf_opt("fast","True") sherpa> conf(1) ... {verbose output omitted for brevity} ... Dataset = 1 Confidence Method = confidence Iterative Fit Method = None Fitting Method = neldermead Statistic = cstat confidence 1-sigma (68.2689%) bounds: Param Best-Fit Lower Bound Upper Bound ----- -------- ----------- ----------- intrin.nH 0.664631 -0.359334 0.171134 spl.PhoIndex 1.69387 -0.0835938 0.0514834 spl.norm 4.29889e-05 -6.09648e-06 9.05212e-06 sth.kT 4.14681 ----- ----- sth.norm 9.36375e-05 ----- 0.000269168 bg1.fwhm 0.584793 -0.130813 0.16131 bg1.pos 6.71899 -0.0576966 0.0724095 bg1.ampl 0.00140018 -0.000216044 0.00027442 bg2.fwhm 0.709707 -0.0855941 0.218332 bg2.pos 1.91964 -0.0393229 0.0377824 bg2.ampl 0.00280728 -0.000275989 0.000748425 bpl.PhoIndex 0.307879 -0.0589773 0.0262201 bpl.HighECut 180.198 -150.863 ----- bpl.norm 0.00466016 -0.00128171 0.00072815 bth.kT 63.8488 -52.2686 ----- bth.norm 6.61171e-06 ----- 3.94346e-06
Note that the lines of dashes "----" in the confidence results indicate that the hard upper or lower limit was reached for one or more parameters. This occurs when the parameter boundary found by the confidence method lies outside the hard limit boundary for a model parameter—this could result from an issue with the signal-to-noise of the data, the applicability of the model to the data, systematic errors in the data, among other things. The interval-projection and region-projection routines are useful for exploring these issues further.
The quality of a fit is also available in the χ^{2} goodness-of-fit information reported after each fit, as well as in the output of the functions get_fit_results and show_fit .
sherpa> show_fit() Optimization Method: NelderMead name = simplex ftol = 1.19209289551e-07 maxfev = None initsimplex = 0 finalsimplex = 9 step = None iquad = 1 verbose = 0 Statistic: CStat Maximum likelihood function (XSPEC style). This is equivalent to the XSpec implementation of the Cash statistic [1]_ except that it requires a model to be fit to the background. To handle the background in the same manner as XSpec, use the WStat statistic. Counts are sampled from the Poisson distribution, and so the best way to assess the quality of model fits is to use the product of individual Poisson probabilities computed in each bin i, or the likelihood L: L = (product)_i [ M(i)^D(i)/D(i)! ] * exp[-M(i)] where M(i) = S(i) + B(i) is the sum of source and background model amplitudes, and D(i) is the number of observed counts, in bin i. The cstat statistic is derived by (1) taking the logarithm of the likelihood function, (2) changing its sign, (3) dropping the factorial term (which remains constant during fits to the same dataset), (4) adding an extra data-dependent term (this is what makes it different to `Cash`, and (5) multiplying by two: C = 2 * (sum)_i [ M(i) - D(i) + D(i)*[log D(i) - log M(i)] ] The factor of two exists so that the change in the cstat statistic from one model fit to the next, (Delta)C, is distributed approximately as (Delta)chi-square when the number of counts in each bin is high. One can then in principle use (Delta)C instead of (Delta)chi-square in certain model comparison tests. However, unlike chi-square, the cstat statistic may be used regardless of the number of counts in each bin. The inclusion of the data term in the expression means that, unlike the Cash statistic, one can assign an approximate goodness-of-fit measure to a given value of the cstat statistic, i.e. the observed statistic, divided by the number of degrees of freedom, should be of order 1 for good fits. Notes ----- The background should not be subtracted from the data when this statistic is used. It should be modeled simultaneously with the source. The cstat statistic function evaluates the logarithm of each data point. If the number of counts is zero or negative, it's not possible to take the log of that number. The behavior in this case is controlled by the `truncate` and `trunc_value` settings in the .sherpa.rc file: - if `truncate` is `True` (the default value), then `log(trunc_value)` is used whenever the data value is <= 0. The default is `trunc_value=1.0e-25`. - when `truncate` is `False` an error is raised. References ---------- .. [1] The description of the Cash statistic (`cstat`) in https://heasarc.gsfc.nasa.gov/xanadu/xspec/manual/XSappendixStatistics.html Fit:Dataset = 1 Method = neldermead Statistic = cstat Initial fit statistic = 939.296 Final fit statistic = 937.949 at function evaluation 6832 Data points = 824 Degrees of freedom = 808 Probability [Q-value] = 0.000999685 Reduced statistic = 1.16083 Change in statistic = 1.3461 intrin.nH 0.664631 spl.PhoIndex 1.69387 spl.norm 4.29889e-05 sth.kT 4.14681 sth.norm 9.36375e-05 bg1.fwhm 0.584793 bg1.pos 6.71899 bg1.ampl 0.00140018 bg2.fwhm 0.709707 bg2.pos 1.91964 bg2.ampl 0.00280728 bpl.PhoIndex 0.307879 bpl.HighECut 180.198 bpl.norm 0.00466016 bth.kT 63.8488 bth.norm 6.61171e-06
Saving the Sherpa Session
Before exiting Sherpa, you may wish to save the session in order to return to the analysis at a later point:
sherpa> save("session1.save") sherpa> save_all("session1.ascii")
The save function records all the information about the current session to the binary file session1.save, and the save_all function records the session settings to an editable ASCII file.
To restore the session that was saved to the binary file session1.save or ASCII file session1.ascii:
sherpa> restore("session1.save")
sherpa> exec(open("session1.ascii").read())
One may verify that the session has been properly restored by examining the information returned by the show_all() command.
Scripting It
The file fit.py is a Python script which performs the primary commands used above; it can be executed by typing exec(open("fit.py").read()) on the Sherpa command line.
The Sherpa script command may be used to save everything typed on the command line in a Sherpa session:
sherpa> script(filename="sherpa.log", clobber=False)
(Note that restoring a Sherpa session from such a file could be problematic since it may include syntax errors, unwanted fitting trials, et cetera.)
The CXC is committed to helping Sherpa users transition to new syntax as smoothly as possible. If you have existing Sherpa scripts or save files, submit them to us via the CXC Helpdesk and we will provide the CIAO/Sherpa 4.11 syntax to you.
Summary
This thread is complete, so we can exit the Sherpa session:
sherpa> quit
History
05 Jul 2010 | original version |
15 Dec 2010 | updated for Sherpa in CIAO 4.3: new functions plot_model_component, get_bkg_scale, and set_xlog/set_ylog. |
29 Jun 2011 | title of a referenced thread was changed from "Independent Background Responses" to "Simultaneously Fitting Source and Background S pectra" |
06 Jan 2012 | reviewed for CIAO 4.4: reordered the ignore and group_counts commands in the section "Reading the PHA Data into Sherpa" to work around a grouping/filtering bug |
13 Dec 2012 | updated for CIAO 4.5: group commands no longer clear the existing data filter |
03 Dec 2013 | reviewed for CIAO 4.6: no changes |
23 Apr 2015 | updated for CIAO 4.7: removed some outdated bug information. |
03 Dec 2015 | updated for CIAO 4.8: no content change |
08 Nov 2016 | updated for CIAO 4.9: no content change, updated fit results |
20 Apr 2018 | updated for CIAO 4.10: no content change |
10 Dec 2018 | updated for CIAO 4.11: screen output and fits updated |