BEP_PCB temperatures check
Summary
| Date start | 2018:099:10:26:03.020 |
| Date stop | 2018:106:13:00:00.086 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/APR0918/ofls |
| Run time | Thu Apr 5 09:02:07 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.31 | -2.40 | -1.63 | -0.49 | 0.57 | 1.75 | 2.56 |
| PITCH | -2.618 | -0.231 | -0.181 | -0.028 | 0.098 | 0.206 | 3.492 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.177 | -0.828 | -0.504 | 0.054 | 0.390 | 0.560 | 1.046 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.31 | 2.00 |
| TMP_BEP_PCB | 99 | 2.56 | 2.00 |
| PITCH | 99 | 3.492 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
