BEP_PCB temperatures check
Summary
| Date start | 2018:113:13:56:00.000 |
| Date stop | 2018:120:10:01:49.097 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/APR2318/ofls |
| Run time | Fri Apr 20 20:58:46 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -3.14 | -1.99 | -1.39 | -0.41 | 0.83 | 1.96 | 3.47 |
| PITCH | -4.055 | -0.233 | -0.159 | 0.049 | 0.176 | 0.230 | 4.453 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.389 | -0.612 | -0.263 | 0.190 | 0.391 | 0.532 | 1.118 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -3.14 | 2.00 |
| TMP_BEP_PCB | 99 | 3.47 | 2.00 |
| PITCH | 1 | -4.055 | 3.00 |
| PITCH | 99 | 4.453 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
