BEP_PCB temperatures check
Summary
| Date start | 2018:120:09:58:49.097 |
| Date stop | 2018:126:19:58:40.621 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/APR3018/ofls |
| Run time | Thu Apr 26 13:29:47 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.55 | -1.74 | -1.22 | -0.20 | 1.04 | 2.05 | 3.57 |
| PITCH | -4.011 | -0.236 | -0.159 | 0.068 | 0.186 | 0.239 | 4.043 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.420 | -0.448 | -0.240 | 0.168 | 0.392 | 0.580 | 1.386 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.55 | 2.00 |
| TMP_BEP_PCB | 99 | 3.57 | 2.00 |
| PITCH | 1 | -4.011 | 3.00 |
| PITCH | 99 | 4.043 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
