BEP_PCB temperatures check
Summary
| Date start | 2018:224:17:19:00.000 |
| Date stop | 2018:232:02:58:35.607 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/AUG1318/ofls |
| Run time | Wed Aug 8 15:35:01 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.39 | -3.07 | -1.92 | -0.72 | 0.72 | 2.44 | 3.33 |
| PITCH | -3.942 | -0.208 | -0.111 | 0.065 | 0.179 | 0.224 | 2.946 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.325 | -0.599 | -0.323 | 0.163 | 0.326 | 0.571 | 1.389 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.39 | 2.00 |
| TMP_BEP_PCB | 99 | 3.33 | 2.00 |
| PITCH | 1 | -3.942 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
