BEP_PCB temperatures check
Summary
| Date start | 2018:232:02:55:35.607 |
| Date stop | 2018:238:18:48:27.685 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/AUG2018/ofls |
| Run time | Fri Aug 17 12:48:46 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -3.66 | -2.70 | -1.67 | -0.49 | 0.81 | 2.54 | 3.40 |
| PITCH | -3.942 | -0.179 | -0.055 | 0.092 | 0.192 | 0.229 | 2.636 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.329 | -0.588 | -0.313 | 0.088 | 0.350 | 0.504 | 1.125 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -3.66 | 2.00 |
| TMP_BEP_PCB | 99 | 3.4 | 2.00 |
| PITCH | 1 | -3.942 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
