BEP_PCB temperatures check
Summary
| Date start | 2017:338:10:26:00.000 |
| Date stop | 2017:345:08:39:21.318 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2017/DEC0417/ofls |
| Run time | Thu Nov 30 09:03:33 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.61 | -2.75 | -1.96 | -0.33 | 1.02 | 1.99 | 3.16 |
| PITCH | -4.247 | -0.223 | -0.147 | -0.024 | 0.131 | 0.213 | 4.078 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.151 | -0.554 | -0.411 | -0.019 | 0.398 | 0.612 | 1.040 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.61 | 2.00 |
| TMP_BEP_PCB | 99 | 3.16 | 2.00 |
| PITCH | 1 | -4.247 | 3.00 |
| PITCH | 99 | 4.078 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
