BEP_PCB temperatures check
Summary
| Date start | 2017:345:08:39:21.318 |
| Date stop | 2017:352:08:02:23.771 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2017/DEC1117/ofls |
| Run time | Tue Dec 5 17:52:25 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.26 | -2.93 | -1.98 | -0.33 | 1.09 | 2.09 | 3.32 |
| PITCH | -4.979 | -0.238 | -0.167 | -0.026 | 0.126 | 0.187 | 4.454 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 0 |
| ROLL | -1.193 | -0.561 | -0.421 | -0.072 | 0.390 | 0.588 | 1.175 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.26 | 2.00 |
| TMP_BEP_PCB | 99 | 3.32 | 2.00 |
| PITCH | 1 | -4.979 | 3.00 |
| PITCH | 99 | 4.454 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
