BEP_PCB temperatures check
Summary
| Date start | 2018:350:19:35:19.442 |
| Date stop | 2018:358:04:36:55.827 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/DEC1718/ofls |
| Run time | Fri Dec 14 08:38:49 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.47 | -1.76 | -1.16 | -0.26 | 1.12 | 2.74 | 3.56 |
| PITCH | -4.985 | -0.269 | -0.196 | -0.009 | 0.190 | 0.257 | 2.776 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.469 | -0.661 | -0.390 | -0.037 | 0.486 | 0.766 | 1.991 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.47 | 2.00 |
| TMP_BEP_PCB | 99 | 3.56 | 2.00 |
| PITCH | 1 | -4.985 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
