BEP_PCB temperatures check
Summary
| Date start | 2018:358:04:33:55.827 |
| Date stop | 2019:007:07:22:27.044 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/DEC2418/ofls |
| Run time | Wed Dec 19 17:16:00 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.92 | -2.01 | -1.34 | -0.43 | 0.98 | 2.46 | 3.49 |
| PITCH | -4.946 | -0.260 | -0.179 | 0.032 | 0.211 | 0.262 | 2.981 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.534 | -0.746 | -0.379 | -0.050 | 0.363 | 0.890 | 2.227 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.92 | 2.00 |
| TMP_BEP_PCB | 99 | 3.49 | 2.00 |
| PITCH | 1 | -4.946 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
