BEP_PCB temperatures check
Summary
| Date start | 2017:358:21:30:57.194 |
| Date stop | 2018:007:18:55:13.157 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2017/DEC2517/ofls |
| Run time | Wed Dec 20 19:44:38 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.24 | -3.36 | -2.42 | -0.91 | 0.52 | 1.54 | 2.51 |
| PITCH | -3.668 | -0.239 | -0.189 | -0.062 | 0.136 | 0.196 | 4.972 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.336 | -0.582 | -0.418 | 0.108 | 0.374 | 0.553 | 1.130 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.24 | 2.00 |
| TMP_BEP_PCB | 99 | 2.51 | 2.00 |
| PITCH | 1 | -3.668 | 3.00 |
| PITCH | 99 | 4.972 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
