BEP_PCB temperatures check
Summary
| Date start | 2020:041:00:20:02.553 |
| Date stop | 2020:047:10:25:23.779 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2020/FEB1020/ofls |
| Run time | Thu Feb 6 08:57:49 2020 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -5.15 | -3.86 | -2.91 | -1.05 | 0.63 | 1.43 | 2.71 |
| PITCH | -6.047 | -0.261 | -0.187 | -0.009 | 0.143 | 0.230 | 3.183 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -2.119 | -1.224 | -0.444 | -0.146 | 0.378 | 0.929 | 2.769 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -5.15 | 2.00 |
| TMP_BEP_PCB | 50 | -1.05 | 1.00 |
| TMP_BEP_PCB | 99 | 2.71 | 2.00 |
| PITCH | 1 | -6.047 | 3.00 |
| PITCH | 99 | 3.183 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
