BEP_PCB temperatures check
Summary
| Date start | 2020:047:10:23:00.000 |
| Date stop | 2020:055:08:53:10.505 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2020/FEB1720/ofls |
| Run time | Thu Feb 13 20:40:21 2020 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -5.10 | -3.84 | -2.77 | -0.91 | 0.58 | 2.13 | 3.20 |
| PITCH | -5.844 | -0.269 | -0.185 | -0.004 | 0.174 | 0.259 | 5.211 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -2.329 | -1.239 | -0.425 | -0.022 | 0.415 | 1.098 | 2.747 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -5.1 | 2.00 |
| TMP_BEP_PCB | 99 | 3.2 | 2.00 |
| PITCH | 1 | -5.844 | 3.00 |
| PITCH | 99 | 5.211 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
