BEP_PCB temperatures check
Summary
| Date start | 2018:050:03:13:00.000 |
| Date stop | 2018:057:08:48:09.986 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/FEB1918/ofls |
| Run time | Wed Feb 14 07:30:30 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -5.16 | -3.42 | -1.58 | 0.08 | 1.74 | 2.77 | 3.59 |
| PITCH | -4.148 | -0.251 | -0.192 | -0.087 | 0.118 | 0.222 | 4.340 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
| ROLL | -1.033 | -0.468 | -0.259 | 0.204 | 0.416 | 0.526 | 1.545 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -5.16 | 2.00 |
| TMP_BEP_PCB | 99 | 3.59 | 2.00 |
| PITCH | 1 | -4.148 | 3.00 |
| PITCH | 99 | 4.34 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
