BEP_PCB temperatures check
Summary
| Date start | 2020:053:15:21:14.164 |
| Date stop | 2020:062:10:05:05.428 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2020/FEB2220/ofls |
| Run time | Thu Feb 20 14:42:56 2020 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -5.05 | -4.07 | -2.98 | -0.91 | 0.35 | 2.27 | 3.28 |
| PITCH | -5.844 | -0.270 | -0.205 | -0.017 | 0.177 | 0.263 | 6.020 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
| ROLL | -3.219 | -1.407 | -0.499 | -0.125 | 0.409 | 0.860 | 2.698 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -5.05 | 2.00 |
| TMP_BEP_PCB | 99 | 3.28 | 2.00 |
| PITCH | 1 | -5.844 | 3.00 |
| PITCH | 99 | 6.02 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
