BEP_PCB temperatures check
Summary
| Date start | 2019:055:09:36:00.000 |
| Date stop | 2019:063:08:09:35.419 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/FEB2519/ofls |
| Run time | Wed Feb 20 20:25:54 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.58 | -2.20 | -1.36 | 0.04 | 1.14 | 2.54 | 4.18 |
| PITCH | -5.521 | -0.265 | -0.183 | -0.007 | 0.187 | 0.254 | 4.898 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.451 | -0.965 | -0.401 | -0.094 | 0.448 | 0.571 | 1.638 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.58 | 2.00 |
| TMP_BEP_PCB | 99 | 4.18 | 2.00 |
| PITCH | 1 | -5.521 | 3.00 |
| PITCH | 99 | 4.898 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
