BEP_PCB temperatures check
Summary
| Date start | 2018:057:08:45:09.986 |
| Date stop | 2018:064:14:18:43.071 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/FEB2618/ofls |
| Run time | Fri Feb 23 18:44:32 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.86 | -2.76 | -1.72 | -0.46 | 1.71 | 2.78 | 4.69 |
| PITCH | -4.056 | -0.243 | -0.188 | -0.080 | 0.129 | 0.215 | 5.089 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.223 | -0.584 | -0.303 | 0.082 | 0.401 | 0.535 | 1.516 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.86 | 2.00 |
| TMP_BEP_PCB | 99 | 4.69 | 2.00 |
| PITCH | 1 | -4.056 | 3.00 |
| PITCH | 99 | 5.089 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
