BEP_PCB temperatures check
Summary
| Date start | 2019:007:07:19:27.044 |
| Date stop | 2019:014:05:33:05.499 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/JAN0719/ofls |
| Run time | Wed Jan 2 15:09:39 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.67 | -3.24 | -2.02 | 0.07 | 1.41 | 2.82 | 4.34 |
| PITCH | -5.221 | -0.255 | -0.156 | -0.005 | 0.221 | 0.267 | 4.511 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
| ROLL | -1.662 | -0.684 | -0.325 | 0.094 | 0.437 | 0.930 | 1.669 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.67 | 2.00 |
| TMP_BEP_PCB | 99 | 4.34 | 2.00 |
| PITCH | 1 | -5.221 | 3.00 |
| PITCH | 99 | 4.511 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
