BEP_PCB temperatures check
Summary
| Date start | 2018:007:18:53:00.000 |
| Date stop | 2018:015:03:53:22.778 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/JAN0818/ofls |
| Run time | Wed Jan 3 14:53:34 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.30 | -3.43 | -2.33 | -0.95 | 0.43 | 1.48 | 2.48 |
| PITCH | -4.086 | -0.250 | -0.200 | -0.065 | 0.161 | 0.237 | 3.023 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 0 |
| ROLL | -1.212 | -0.589 | -0.400 | -0.027 | 0.253 | 0.343 | 1.130 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.3 | 2.00 |
| TMP_BEP_PCB | 99 | 2.48 | 2.00 |
| PITCH | 1 | -4.086 | 3.00 |
| PITCH | 99 | 3.023 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
