BEP_PCB temperatures check
Summary
| Date start | 2019:027:21:25:19.961 |
| Date stop | 2019:034:23:57:17.833 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/JAN2819/ofls |
| Run time | Wed Jan 23 14:54:12 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.28 | -1.39 | -0.73 | 0.36 | 1.39 | 2.70 | 3.69 |
| PITCH | -3.026 | -0.261 | -0.206 | -0.013 | 0.184 | 0.258 | 5.000 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 0 |
| ROLL | -1.520 | -1.127 | -0.356 | 0.058 | 0.481 | 0.775 | 1.488 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.28 | 2.00 |
| TMP_BEP_PCB | 99 | 3.69 | 2.00 |
| PITCH | 1 | -3.026 | 3.00 |
| PITCH | 99 | 5.0 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
