BEP_PCB temperatures check
Summary
| Date start | 2018:028:23:09:00.000 |
| Date stop | 2018:036:01:06:54.765 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/JAN2918/ofls |
| Run time | Wed Jan 24 09:18:35 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.89 | -3.22 | -2.44 | -0.71 | 0.95 | 2.17 | 3.18 |
| PITCH | -5.391 | -0.261 | -0.212 | -0.135 | 0.157 | 0.243 | 2.757 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.164 | -0.421 | -0.272 | 0.009 | 0.374 | 0.502 | 1.316 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.89 | 2.00 |
| TMP_BEP_PCB | 99 | 3.18 | 2.00 |
| PITCH | 1 | -5.391 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
