BEP_PCB temperatures check
Summary
| Date start | 2020:195:00:25:40.393 |
| Date stop | 2020:201:16:09:24.040 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2020/JUL1320/ofls |
| Run time | Wed Jul 8 10:40:56 2020 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.75 | -2.22 | -1.44 | -0.54 | 0.88 | 1.62 | 2.55 |
| PITCH | -4.767 | -0.017 | -0.001 | 0.000 | 0.001 | 0.017 | 2.998 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -0.605 | -0.017 | -0.003 | -0.000 | 0.003 | 0.011 | 0.488 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.75 | 2.00 |
| TMP_BEP_PCB | 99 | 2.55 | 2.00 |
| PITCH | 1 | -4.767 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
PITCH
TSCPOS
ROLL
CCD/FEP Count
