BEP_PCB temperatures check
Summary
| Date start | 2018:154:23:26:21.284 |
| Date stop | 2018:162:04:14:21.397 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/JUN0418/ofls |
| Run time | Wed May 30 16:46:42 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.53 | -3.31 | -1.99 | -0.70 | 0.48 | 2.16 | 3.48 |
| PITCH | -4.280 | -0.234 | -0.190 | 0.004 | 0.180 | 0.229 | 3.632 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.134 | -0.354 | -0.241 | 0.092 | 0.278 | 0.570 | 1.588 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.53 | 2.00 |
| TMP_BEP_PCB | 99 | 3.48 | 2.00 |
| PITCH | 1 | -4.28 | 3.00 |
| PITCH | 99 | 3.632 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
