BEP_PCB temperatures check
Summary
| Date start | 2018:162:04:14:21.397 |
| Date stop | 2018:169:02:41:05.196 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/JUN1118/ofls |
| Run time | Fri Jun 8 17:32:47 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.72 | -3.70 | -1.99 | -0.65 | 1.24 | 2.11 | 3.33 |
| PITCH | -4.964 | -0.234 | -0.182 | 0.023 | 0.170 | 0.219 | 3.947 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.049 | -0.489 | -0.312 | 0.108 | 0.310 | 0.682 | 1.497 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.72 | 2.00 |
| TMP_BEP_PCB | 99 | 3.33 | 2.00 |
| PITCH | 1 | -4.964 | 3.00 |
| PITCH | 99 | 3.947 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
