BEP_PCB temperatures check
Summary
| Date start | 2018:169:02:39:00.000 |
| Date stop | 2018:176:04:06:39.436 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/JUN1818/ofls |
| Run time | Wed Jun 13 09:21:43 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.81 | -3.50 | -1.76 | -0.55 | 1.34 | 1.99 | 3.21 |
| PITCH | -4.227 | -0.228 | -0.169 | 0.026 | 0.180 | 0.222 | 3.112 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.051 | -0.523 | -0.370 | 0.075 | 0.270 | 0.486 | 1.059 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.81 | 2.00 |
| TMP_BEP_PCB | 99 | 3.21 | 2.00 |
| PITCH | 1 | -4.227 | 3.00 |
| PITCH | 99 | 3.112 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
