BEP_PCB temperatures check
Summary
| Date start | 2018:174:14:57:00.000 |
| Date stop | 2018:182:08:07:11.776 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/JUN2318/ofls |
| Run time | Thu Jun 21 20:17:10 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.96 | -3.87 | -1.66 | -0.49 | 1.25 | 3.21 | 4.05 |
| PITCH | -3.345 | -0.224 | -0.166 | 0.061 | 0.186 | 0.227 | 3.112 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.360 | -0.521 | -0.365 | 0.088 | 0.270 | 0.610 | 1.302 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.96 | 2.00 |
| TMP_BEP_PCB | 99 | 4.05 | 2.00 |
| PITCH | 1 | -3.345 | 3.00 |
| PITCH | 99 | 3.112 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
