BEP_PCB temperatures check
Summary
| Date start | 2019:063:08:07:00.000 |
| Date stop | 2019:069:21:43:27.956 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/MAR0419/ofls |
| Run time | Thu Feb 28 14:57:32 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.70 | -2.09 | -1.29 | -0.16 | 1.00 | 2.08 | 3.44 |
| PITCH | -5.096 | -0.268 | -0.205 | -0.048 | 0.173 | 0.245 | 4.892 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.434 | -0.745 | -0.346 | 0.054 | 0.511 | 0.768 | 1.786 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.7 | 2.00 |
| TMP_BEP_PCB | 99 | 3.44 | 2.00 |
| PITCH | 1 | -5.096 | 3.00 |
| PITCH | 99 | 4.892 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
