BEP_PCB temperatures check
Summary
| Date start | 2018:064:14:15:43.071 |
| Date stop | 2018:071:06:33:08.650 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/MAR0518/ofls |
| Run time | Thu Mar 1 07:57:14 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.35 | -2.37 | -1.48 | -0.23 | 1.40 | 2.78 | 4.01 |
| PITCH | -4.661 | -0.243 | -0.193 | -0.058 | 0.108 | 0.214 | 5.471 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.240 | -0.579 | -0.290 | 0.176 | 0.457 | 0.606 | 1.660 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.35 | 2.00 |
| TMP_BEP_PCB | 99 | 4.01 | 2.00 |
| PITCH | 1 | -4.661 | 3.00 |
| PITCH | 99 | 5.471 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
