BEP_PCB temperatures check
Summary
| Date start | 2019:069:21:40:27.956 |
| Date stop | 2019:076:13:19:13.138 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/MAR1119/ofls |
| Run time | Thu Mar 7 20:56:11 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.69 | -2.04 | -1.25 | -0.22 | 1.07 | 2.27 | 3.26 |
| PITCH | -4.702 | -0.279 | -0.202 | -0.073 | 0.126 | 0.219 | 4.038 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.584 | -0.982 | -0.333 | 0.077 | 0.553 | 0.913 | 1.739 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.69 | 2.00 |
| TMP_BEP_PCB | 99 | 3.26 | 2.00 |
| PITCH | 1 | -4.702 | 3.00 |
| PITCH | 99 | 4.038 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
