BEP_PCB temperatures check
Summary
| Date start | 2018:071:06:31:00.000 |
| Date stop | 2018:078:09:47:10.427 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/MAR1218/ofls |
| Run time | Wed Mar 7 16:52:35 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.54 | -1.92 | -1.36 | -0.19 | 1.47 | 2.74 | 4.02 |
| PITCH | -3.952 | -0.237 | -0.179 | -0.034 | 0.129 | 0.217 | 4.656 |
| TSCPOS | -1 | -1 | -1 | 0 | 1 | 1 | 1 |
| ROLL | -1.411 | -0.456 | -0.281 | 0.245 | 0.484 | 0.619 | 1.623 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.54 | 2.00 |
| TMP_BEP_PCB | 99 | 4.02 | 2.00 |
| PITCH | 1 | -3.952 | 3.00 |
| PITCH | 99 | 4.656 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
