BEP_PCB temperatures check
Summary
| Date start | 2018:078:09:44:10.427 |
| Date stop | 2018:085:10:06:24.882 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/MAR1918/ofls |
| Run time | Thu Mar 15 19:14:58 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.23 | -1.61 | -1.12 | 0.03 | 1.53 | 2.70 | 3.97 |
| PITCH | -3.988 | -0.235 | -0.155 | -0.047 | 0.101 | 0.212 | 3.903 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.382 | -0.540 | -0.370 | 0.255 | 0.486 | 0.614 | 1.556 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.23 | 2.00 |
| TMP_BEP_PCB | 99 | 3.97 | 2.00 |
| PITCH | 1 | -3.988 | 3.00 |
| PITCH | 99 | 3.903 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
