BEP_PCB temperatures check
Summary
| Date start | 2018:085:10:03:24.882 |
| Date stop | 2018:092:09:58:31.151 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/MAR2618/ofls |
| Run time | Wed Mar 21 17:11:46 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.28 | -1.65 | -1.18 | -0.28 | 1.51 | 2.54 | 3.73 |
| PITCH | -3.163 | -0.221 | -0.130 | -0.045 | 0.096 | 0.209 | 3.914 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -1.199 | -0.563 | -0.442 | 0.095 | 0.453 | 0.581 | 1.251 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.28 | 2.00 |
| TMP_BEP_PCB | 99 | 3.73 | 2.00 |
| PITCH | 1 | -3.163 | 3.00 |
| PITCH | 99 | 3.914 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
