BEP_PCB temperatures check
Summary
| Date start | 2018:126:19:56:00.000 |
| Date stop | 2018:133:23:55:32.970 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/MAY0718/ofls |
| Run time | Thu May 3 08:21:38 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.30 | -1.73 | -1.19 | -0.22 | 0.83 | 2.36 | 3.62 |
| PITCH | -3.795 | -0.238 | -0.181 | 0.065 | 0.187 | 0.234 | 3.437 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.527 | -0.396 | -0.213 | 0.124 | 0.389 | 0.626 | 1.621 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.3 | 2.00 |
| TMP_BEP_PCB | 99 | 3.62 | 2.00 |
| PITCH | 1 | -3.795 | 3.00 |
| PITCH | 99 | 3.437 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
