BEP_PCB temperatures check
Summary
| Date start | 2018:133:23:52:32.970 |
| Date stop | 2018:141:03:38:03.643 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/MAY1418/ofls |
| Run time | Fri May 11 14:11:33 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.30 | -2.39 | -1.41 | -0.36 | 0.82 | 2.56 | 3.39 |
| PITCH | -3.874 | -0.232 | -0.169 | 0.049 | 0.184 | 0.231 | 3.164 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.110 | -0.497 | -0.206 | 0.114 | 0.434 | 0.725 | 1.512 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.3 | 2.00 |
| TMP_BEP_PCB | 99 | 3.39 | 2.00 |
| PITCH | 1 | -3.874 | 3.00 |
| PITCH | 99 | 3.164 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
