BEP_PCB temperatures check
Summary
| Date start | 2018:141:03:35:03.643 |
| Date stop | 2018:147:23:27:16.409 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/MAY2118/ofls |
| Run time | Thu May 17 14:24:22 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.29 | -2.63 | -1.36 | -0.36 | 0.66 | 2.64 | 3.61 |
| PITCH | -4.008 | -0.227 | -0.162 | 0.040 | 0.177 | 0.229 | 3.050 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 0 |
| ROLL | -1.114 | -0.539 | -0.267 | 0.106 | 0.326 | 0.694 | 1.480 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.29 | 2.00 |
| TMP_BEP_PCB | 99 | 3.61 | 2.00 |
| PITCH | 1 | -4.008 | 3.00 |
| PITCH | 99 | 3.05 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
