BEP_PCB temperatures check
Summary
| Date start | 2019:146:23:52:35.589 |
| Date stop | 2019:154:00:43:52.185 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/MAY2719/ofls |
| Run time | Tue May 21 16:26:06 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -3.36 | -2.54 | -1.92 | -0.97 | 0.06 | 1.26 | 2.29 |
| PITCH | -4.371 | -0.232 | -0.174 | 0.004 | 0.150 | 0.237 | 4.346 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 0 |
| ROLL | -1.626 | -0.832 | -0.473 | 0.036 | 0.321 | 1.137 | 2.340 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -3.36 | 2.00 |
| TMP_BEP_PCB | 99 | 2.29 | 2.00 |
| PITCH | 1 | -4.371 | 3.00 |
| PITCH | 99 | 4.346 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
