BEP_PCB temperatures check
Summary
| Date start | 2018:147:23:25:00.000 |
| Date stop | 2018:154:23:29:21.284 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/MAY2818/ofls |
| Run time | Tue May 22 14:39:10 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -3.34 | -2.22 | -1.52 | -0.52 | 0.64 | 2.73 | 3.67 |
| PITCH | -4.144 | -0.230 | -0.176 | 0.034 | 0.175 | 0.231 | 3.099 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 1 |
| ROLL | -1.157 | -0.549 | -0.299 | 0.080 | 0.301 | 0.534 | 1.503 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -3.34 | 2.00 |
| TMP_BEP_PCB | 99 | 3.67 | 2.00 |
| PITCH | 1 | -4.144 | 3.00 |
| PITCH | 99 | 3.099 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
