BEP_PCB temperatures check
Summary
| Date start | 2018:307:14:34:43.215 |
| Date stop | 2018:314:14:56:48.948 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/NOV0518/ofls |
| Run time | Fri Nov 2 12:56:47 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.67 | -2.27 | -1.68 | -0.66 | 0.59 | 2.37 | 7.56 |
| PITCH | -63.805 | -0.270 | -0.227 | -0.066 | 0.018 | 0.067 | 0.591 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -0.722 | -0.513 | -0.372 | 0.006 | 0.561 | 0.681 | 1.021 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.67 | 2.00 |
| TMP_BEP_PCB | 99 | 7.56 | 2.00 |
| PITCH | 1 | -63.805 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
