BEP_PCB temperatures check
Summary
| Date start | 2017:310:08:39:48.275 |
| Date stop | 2017:317:06:56:10.059 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2017/NOV0617/ofls |
| Run time | Wed Nov 1 08:05:26 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -3.15 | -2.37 | -1.64 | -0.39 | 0.61 | 2.14 | 2.91 |
| PITCH | -4.489 | -0.207 | -0.120 | 0.003 | 0.173 | 0.226 | 5.176 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 0 | 0 |
| ROLL | -1.028 | -0.409 | -0.288 | -0.071 | 0.386 | 0.578 | 1.236 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -3.15 | 2.00 |
| TMP_BEP_PCB | 99 | 2.91 | 2.00 |
| PITCH | 1 | -4.489 | 3.00 |
| PITCH | 99 | 5.176 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
