BEP_PCB temperatures check
Summary
| Date start | 2019:312:13:35:01.285 |
| Date stop | 2019:314:14:03:27.955 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/NOV0919/ofls |
| Run time | Mon Nov 4 17:31:26 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.46 | -3.92 | -3.06 | -1.64 | -0.45 | 0.27 | 1.84 |
| PITCH | -4.337 | -0.265 | -0.207 | -0.048 | 0.196 | 0.264 | 3.337 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.685 | -1.067 | -0.490 | -0.186 | 0.307 | 1.248 | 1.681 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.46 | 2.00 |
| TMP_BEP_PCB | 50 | -1.64 | 1.00 |
| PITCH | 1 | -4.337 | 3.00 |
| PITCH | 99 | 3.337 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
