BEP_PCB temperatures check
Summary
| Date start | 2019:314:14:01:00.000 |
| Date stop | 2019:321:21:21:20.464 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2019/NOV1119/ofls |
| Run time | Thu Nov 7 18:15:40 2019 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.54 | -3.95 | -2.88 | -1.62 | -0.30 | 0.39 | 1.88 |
| PITCH | -4.490 | -0.264 | -0.195 | -0.048 | 0.210 | 0.267 | 3.396 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 0 | 1 |
| ROLL | -1.661 | -1.070 | -0.445 | -0.175 | 0.330 | 1.282 | 1.672 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.54 | 2.00 |
| TMP_BEP_PCB | 50 | -1.62 | 1.00 |
| PITCH | 1 | -4.49 | 3.00 |
| PITCH | 99 | 3.396 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
