BEP_PCB temperatures check
Summary
| Date start | 2018:322:17:26:00.000 |
| Date stop | 2018:329:21:35:43.954 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/NOV1918/ofls |
| Run time | Thu Nov 15 09:59:06 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -3.28 | -2.07 | -1.71 | -0.85 | 0.43 | 1.81 | 3.21 |
| PITCH | -2.436 | -0.277 | -0.240 | -0.132 | 0.174 | 0.264 | 2.501 |
| TSCPOS | -1 | -1 | -1 | 0 | 1 | 1 | 1 |
| ROLL | -0.731 | -0.561 | -0.374 | -0.003 | 0.273 | 0.598 | 1.116 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -3.28 | 2.00 |
| TMP_BEP_PCB | 99 | 3.21 | 2.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
