BEP_PCB temperatures check
Summary
| Date start | 2017:323:15:04:56.581 |
| Date stop | 2017:330:11:58:49.241 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2017/NOV2017/ofls |
| Run time | Wed Nov 15 08:14:02 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.60 | -2.62 | -1.63 | -0.33 | 0.56 | 1.90 | 2.82 |
| PITCH | -5.655 | -0.195 | -0.123 | -0.031 | 0.076 | 0.219 | 4.412 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -0.960 | -0.320 | 0.169 | 0.317 | 0.520 | 0.639 | 1.281 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.6 | 2.00 |
| TMP_BEP_PCB | 99 | 2.82 | 2.00 |
| PITCH | 1 | -5.655 | 3.00 |
| PITCH | 99 | 4.412 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
