BEP_PCB temperatures check
Summary
| Date start | 2017:330:12:15:01.285 |
| Date stop | 2017:338:10:28:24.258 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2017/NOV2717/ofls |
| Run time | Mon Nov 20 21:20:50 2017 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -4.67 | -2.60 | -1.42 | -0.29 | 0.68 | 1.89 | 2.87 |
| PITCH | -5.039 | -0.216 | -0.137 | -0.035 | 0.124 | 0.216 | 4.257 |
| TSCPOS | -1 | -1 | -1 | 0 | 0 | 1 | 1 |
| ROLL | -0.654 | -0.400 | -0.078 | 0.289 | 0.535 | 0.643 | 1.134 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -4.67 | 2.00 |
| TMP_BEP_PCB | 99 | 2.87 | 2.00 |
| PITCH | 1 | -5.039 | 3.00 |
| PITCH | 99 | 4.257 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
PITCH
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
TSCPOS
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
ROLL
Note: BEP_PCB residual histograms include only points where TMP_BEP_PCB > 20.0 degC.
Red = telemetry, blue = model
