BEP_PCB temperatures check
Summary
| Date start | 2018:280:05:55:00.000 |
| Date stop | 2018:288:04:13:59.326 |
| Model status | OK (Planning Limit = 42.0 C) |
| Load directory | /data/acis/LoadReviews/2018/OCT0818/ofls |
| Run time | Fri Oct 5 08:49:02 2018 by acisdude |
| Run log | run.dat |
| Temperatures | temperatures.dat |
| States | states.dat |
No TMP_BEP_PCB Hot Violations
No TMP_BEP_PCB Cold Violations
BEP_PCB Model Validation
MSID quantiles
Note: BEP_PCB quantiles are calculated using only points where TMP_BEP_PCB > 20.0 degC.
| MSID | 1% | 5% | 16% | 50% | 84% | 95% | 99% |
|---|---|---|---|---|---|---|---|
| TMP_BEP_PCB | -2.46 | -1.96 | -1.20 | -0.43 | 0.67 | 1.69 | 2.57 |
| PITCH | -4.193 | -0.214 | -0.122 | 0.005 | 0.137 | 0.202 | 2.583 |
| TSCPOS | -1 | -1 | -1 | -1 | 0 | 1 | 1 |
| ROLL | -1.150 | -0.650 | -0.333 | 0.215 | 0.535 | 0.717 | 1.182 |
Validation Violations
| MSID | Quantile | Value | Limit |
|---|---|---|---|
| TMP_BEP_PCB | 1 | -2.46 | 2.00 |
| TMP_BEP_PCB | 99 | 2.57 | 2.00 |
| PITCH | 1 | -4.193 | 3.00 |
TMP_BEP_PCB
Note: BEP_PCB residual histograms include points where TMP_BEP_PCB >= 20.0 degC in blue and points where TMP_BEP_PCB <= 20.0 degC in red.
Red = telemetry, blue = model
PITCH
Red = telemetry, blue = model
TSCPOS
Red = telemetry, blue = model
ROLL
Red = telemetry, blue = model
